# =============================================================================
# config_local.example.py - Operational / secret-value template (Pi 4 PMS7003 particulate-matter module)
#
#   Usage:  cp config_local.example.py config_local.py
#            -> Fill in the real values and save. Never commit config_local.py
#              (it is excluded via .gitignore).
#
# WARNING: Server compatibility
#   This module reports PMS7003 particulate-matter (PM1.0/PM2.5/PM10, ug/m3) readings to the
#   cafe24 server php/api/sensor_data.php. The server requires a raw-body signature:
#       X-Signature = lowercase_hex(HMAC-SHA256(key=API_KEY, msg=request body bytes))
#   -> API_KEY must be "exactly identical" to API_KEY in the server config.local.php.
#   Threshold decisions (high PM2.5 / PM10), SMS, and the dashboard are all done by the server.
# =============================================================================

# -----------------------------------------------
# Server API endpoint (receiving server = cafe24 php/)
#   Web root per INSTALL_PI_SERVER.md: public_html/raspi_leck_detecter/
# -----------------------------------------------
API_URL = "https://YOUR_SERVER/raspi_leck_detecter/api/sensor_data.php"

# -----------------------------------------------
# Shared secret key - must be exactly identical to API_KEY in the server config.local.php. Never commit.
# -----------------------------------------------
API_KEY = "CHANGE_ME"

# -----------------------------------------------
# Device identification. The PMS7003 co-locates on an EXISTING leak node and reports under the
# SAME sensor_id as that node's leak sensor (distinguished by metric_type="pms7003").
#   - Pi-C leak node: keep the config.py default (SENSOR_ID=3) - leave SENSOR_ID commented out.
#   - id=1 leak node: uncomment and set SENSOR_ID=1 (and an appropriate SENSOR_NAME).
# -----------------------------------------------
DEVICE_ID = "rpi4-pms7003-01"
DEVICE_LOCATION = "Server Room"

# -----------------------------------------------
# Per-device overrides (optional). Uncomment on the id=1 node.
# -----------------------------------------------
# SENSOR_ID = 1
# SENSOR_NAME = "Sensor 1 (PMS7003)"
# REPORT_INTERVAL = 600
# UART_PORT = "/dev/serial0"