Commit graph

10 commits

Author SHA1 Message Date
유창욱
3aca674a78 feat: 이해관계자 페르소나 검증 4건 — 열람 감사 · 증거 보존 · 크론 생존 · 증거 정책 (1.3.0)
Some checks failed
verify / edge (push) Has been cancelled
verify / server (push) Has been cancelled
앞선 감사 네 번은 "이 코드가 제대로 도는가"를 물었다. 이번엔 작업자·노조·안전관리자·
공장장·설치기사 5인 관점으로 3단논법을 세우고 전제를 코드로 확인한 뒤 반문으로 깼다.
5인 중 2인의 논증이 완전히, 2인이 부분적으로 무너졌다.

읽기 감사 — 이 시스템은 쓰기를 전부 감사했다. 임계값 한 번 바꾼 것까지 해시 체인에
들어간다. 그런데 작업자 사진을 열어보는 것은 하나도 남지 않았다. 감시 시스템과 안전
시스템을 가르는 선이 정확히 거기라서, 나머지 프라이버시 설계(RAM 링버퍼 7.5초·전송 전
얼굴 블러·라이브뷰 부재)가 전부 이 한 줄이 없어서 검증 불가능한 주장에 머물러 있었다.
거부된 열람은 기록하지 않는다 — 그러면 감사 로그가 "본 사람"이 아니라 "요청한 사람"
목록이 되어 정작 누가 봤는지를 묻는 데 못 쓴다.

크론 생존 — 죽은 노드는 스스로 신고할 수 없어서 크론이 하트비트의 부재로 판정한다.
그런데 그 크론이 멈추면 아무도 판정하지 않는다. 통보·5분 확대·장치 이상 발행이 전부 그
한 프로세스에 걸려 있어서, 멈춘 순간부터 화면은 조용해지고 그 침묵은 "사고 없음"과
구별되지 않는다. 감시자의 생존은 감시자가 아닌 쪽이 읽어야 한다.

증거 보존 — 스냅샷 삭제가 나이 하나만 봤다. 기본 7일인데 중대재해 조사는 몇 주에서 몇
달이라, 우리가 내건 목적("사고 후 원인 분석")이 8일째에 스스로 사라졌다. 확인 처리로
자동 연장하지 않는 이유는 자동이면 사실상 전량 보존이 되어 7일 약속이 무너지기 때문이다.

증거 정책 — 프레임이 ergo_report 하나만 빼고 모든 이벤트에 붙었다. 체류 상한 초과도
포함이라, 밀폐공간 프리셋 기본값(30분) 기준으로 정상 작업자가 규정대로 일하는 동안
주기적으로 본인 사진이 서버로 갔다. 위험해서가 아니라 오래 있어서. 기준을 명문화했다:
시간 경과 자체가 조건인 이벤트에는 사진을 붙이지 않는다.

마이그레이션 2026-09-25-evidence-hold-and-view-audit.sql (README-UPLOAD 10번).

검증: phpunit 302 passed(신규 18, 스킵 0) · pytest(신규 18)

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EBjuR7DW6PNNMows4KnbYU
2026-09-25 18:34:26 +09:00
유창욱
e00ad69aa3 feat(safety,ux): 통보·억제·증거 체계 신설 + UI/UX 감사 21건 반영
UI/UX 점검에서 시작해 "이 제품이 안전 시스템으로서 무엇이 없나"까지 내려간 작업.
두 덩어리를 한 커밋으로 둔다 — 뒤쪽 기능들이 앞쪽에서 고친 화면 위에 얹혀 있다.

━━ 1부: UI/UX 감사 21건 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

동선 — 확인(ack) 경로가 위험했다
- 스트림 정렬을 '미확인 우선'에서 엄격 시간순으로 되돌린다. 확인 상태가 연대기를
  뒤집어 사고 재구성이 불가능했고, 확인하면 그 행이 목록 밖으로 사라지며 아래 행이
  밀려 올라와 같은 좌표를 두 번 누르면 다른 이벤트가 확인 처리됐다. 이제 제자리에서
  '확인됨'으로 전환되고 확정 토스트가 뜬다. 처리 큐는 정렬이 아니라 뷰모드 필터로 분리
  (전환해도 행끼리 상대 순서는 절대 안 바뀐다).
- 실행취소는 넣지 않았다. acknowledged_by는 감사로그가 함께 남는 추가 전용 기록이라
  무음 되돌리기가 안전 시스템에서 더 나쁜 속성이다. 대신 오탐·구역삭제를 2단계 확정으로.
- 이벤트 상세에 확인/오탐 신설. 판단하는 화면에 판단 도구가 없었다.
- 구역 설정에 장치·카메라 선택기. 시스템이 아는 값을 사람에게 묻고 있었고,
  플레이스홀더(device-01)마저 실제와 다른 포맷을 가르쳤다.
- 날짜 조회(키셋 커서 시딩). 사고 조사 진입로가 아예 없어 '더 보기'를 반복해야 했다.
- 경보음 세션 음소거(새 위급 도착 시 자동 해제). 끌 수 없는 반복음은 안전 콘솔이
  통째로 꺼지는 경로다.

전달 — 같은 단어가 화면마다 다른 숫자를 가리켰다
- KPI '미확인'(최근 200건)과 24시간 브리프 '미확인'이 40px 간격으로 충돌했다.
  KPI에 실제 집계 범위를 명시. 중대=위급+높음을 인라인 정의.
- 페이지 명칭 3종·날짜 포맷 3종 통일. '확인 필요' 칩을 전 심각도로 확장
  (그전엔 확인 여부가 먼 컬럼의 버튼 유무로만 구분됐다).
- 표본 게이트: 오탐율 '100% (1/1)'이 '33% (5/15)'보다 위에 뜨던 것, 최다 3건짜리
  시간패턴 히트맵, 6→8건에 붙던 빨간 ▲33%. 개선조치 효과는 푸아송 잡음 범위(√before)를
  넘어야 방향을 주장한다 — 안전회의에서 한 번 반박당하면 카드 전체가 신뢰를 잃는다.
- 카메라 위험 순위가 중대>0이면 전부 빨강이라 순위 노릇을 못 했다. 상대 기준으로.

시각 — 화면마다 완성도가 달랐다
- 구역 설정·이벤트 상세를 카드 셸로 재구성. 둘 다 스타일 없는 기본 폼이었고,
  납품 심사에서 "덜 만든 티"는 정확히 거기서 났다.
- 히트맵 토글은 aria-pressed만 있고 CSS 규칙이 없어 켜졌는지 눈으로 알 수 없었다.
- 존 색을 팔레트와 정합(팔레트 어디에도 없던 보라 제거), 채움+라벨칩+협착 점선.
  캔버스에 1px 외곽선만 그리면 실제 공장 프레임에서 사라진다.

━━ 2부: 안전 플랫폼 (마이그레이션 2026-08-09-safety-platform.sql) ━━━

통보 — 이 제품의 정의에 해당하는 구멍
  지금까지 감지는 브라우저 탭이 열려 있고 사람이 보고 있어야만 전달됐다. 새벽 3시에
  넘어진 작업자는 DB에 행 하나를 남기고 아침을 맞았다.
- 엣지 GPIO 경광등(edge/beacon.py). 인터넷·서버 없이 동작하는 유일한 경로라
  어떤 현장이든 이것부터 설정한다. /api/config의 beacons로 배선을 받고, 하드웨어가
  없거나 핀이 안 열리면 NullBeacon으로 떨어지되 그 사실은 반드시 로그로 남긴다.
- 메일·웹훅 채널 + 크론 디스패처(tools/dispatch_alerts.php). 중복 발송은 읽고-쓰기가
  아니라 (event,channel) UNIQUE로 막는다 — 크론 중첩 실행은 공유호스팅의 상수다.
- 미확인 위급은 unacked_escalation 이벤트가 되어 상위 채널로 올라간다(event_uuid로 멱등).
  '아무도 보지 않았다'는 사실 자체를 사건으로 만든다.
- 통보에 이미지는 싣지 않는다. 스냅샷은 PIPA 대상이고 메일링 리스트로 나가는 순간
  인증 프록시가 지키던 통제를 벗어난다 — 링크만 보낸다.

조용한 실패 제거
- 카메라 화각 이동·가림·조도 저하 감지(detectors/integrity.py). 존 판정은 화각 고정을
  전제로 서 있는데, 삼각대를 스치면 제한구역이 엉뚱한 바닥을 가리키면서 시스템은 계속
  초록불이었다. numpy만 사용하고, 지나가는 사람과 구분하기 위해 지속시간을 요구한다.
- 스토리지 여유 감시. 디스크가 차면 이미지 저장만 조용히 실패하고 보드는 멀쩡해 보인다.

끊겨 있던 배선 2건
- thresholds_from_config()가 정의만 있고 어디서도 호출되지 않았다. 서버에 표가 있고
  /api/config가 성실히 실어 보내고 엣지가 파싱한 뒤 버렸다 — 관리자가 무엇을 바꿔도
  장비는 부팅 시 edge.env 값으로 영원히 돌았다(edge/tuning.py).
- 존·임계값 저장이 config_version을 올리지 않아 '설정 지연' 표시가 애초에 켜질 수
  없었다. 지표는 있는데 그것을 켜는 사건이 없었다.

관리 화면 (그전에는 phpMyAdmin이 유일한 방법이었다)
- 임계값 편집: 자유 텍스트가 아니라 카탈로그(범위·단위·설명)로 렌더한다. 범위 밖 값은
  엣지가 기동 시 거부하는데 그때는 이미 공장 안 장비가 재시작 루프다. 키보드 앞에서 막는다.
  목록에 없는 키는 저장 불가 — 장비가 조용히 무시할 값이 '설정됨'으로 보이면 안 된다.
- 정비 억제: 사유 필수, 최대 8시간(한 교대), 자동 만료. 감지와 기록은 그대로 계속되고
  통보만 보류되며 그 보류도 원장에 status='suppressed'로 남는다 — 조사에서 '경보가 났지만
  의도적으로 withheld됐다'를 볼 수 있어야 한다.
- 교대 인수인계, 위험성평가, 설비 성능 추이, 설치 점검(/setup — 실제 상태 조회 기반).

증거·규정
- 감사로그 해시체인. 공유호스팅은 append-only 권한을 줄 수 없으니 '막는' 대신 '숨길 수
  없게' 만든다. 수정·삭제·우회삽입이 전부 탐지되고(tools/verify_audit_chain.php, 손상 시
  exit 1), 체인 이전 행은 손상이 아니라 '검증 불가 구간'으로 따로 센다 — 정상 시스템이
  매번 빨간불을 켜면 아무도 이 도구를 안 본다.
- 사고조사 패키지 1클릭: 전후 타임라인 + 통보 이력(누구에게 닿았는가) + 위험요인 +
  조치 이력 + 서명란. 인쇄 CSS로 그대로 제출 가능. 사고 다음 날 반나절을 쓸 사람은 없다.
- 이벤트→조치 직접 기록, 현장별 롤업(전역 계정만).

운영
- 일괄 확인(위급은 의도적으로 제외·2단계 확정), 키보드 트리아지(J/K/A/F/Enter),
  모바일 레이아웃(44px 타깃), 보존기간 정리(tools/maintain.php),
  백업/복구(tools/backup.php — www 안 출력은 거부), 데모 시드(tools/seed_demo.php).
- tools/는 전부 CLI 전용이고 납품 시 move_detect_app/tools/에 www 밖으로 배치된다.

미착수 4건 (모델·하드웨어가 선행 조건)
- 보호구·중장비 근접·화재 감지는 AGPL 아닌 가중치 확보 + HEF 컴파일이 관문이다.
  감지기 배선·이벤트 계약·심각도·쿨다운·테스트까지 만들고 기본 비활성으로 둔다
  (edge/detectors/pending.py). enabled=True인데 model=None이면 아무것도 하지 않도록
  명시적으로 막았다 — "곧 됩니다" 상태로 켜 두면 현장은 감지되고 있다고 믿는다.
- PLC 접점 협착 게이팅도 같은 이유로 인터페이스만.

검증: pytest 통과(skip 3 = 하드웨어·환경) / PHPUnit 221 (skip 0, +59).
Chrome 실렌더로 신규 4화면 + 임계값 저장→config_version 증가→감사 기록→체인 검증→
행 변조→탐지(exit 1) 전 경로 확인. cafe24 번들 + Pi 오프라인 번들(aarch64 휠 11개)
재생성, 소스 패리티 통과. 보안 자체점검: SQL 문자열 보간 0, innerHTML 0,
상태 변경 핸들러 전부 CSRF+RBAC.
2026-08-18 07:51:23 +09:00
유창욱
51eed139cf feat(evidence): pre-event snapshot timeline + 24h catch-up brief
Two operator-value features: evidence that shows HOW it happened, and the
one-line answer to "what happened overnight".

Evidence timeline (closes the P1-B "前中後 스냅샷 배선" follow-up):
- The ring buffer now stores per-frame head boxes, and an event captures the
  frames nearest T-2.5s / T-1.0s / T-0 (server cap: 3 snapshots). A fall's
  evidentiary value is in the seconds BEFORE the person hit the floor - one
  end-state frame never showed how it happened.
- Each past frame is blurred with the head positions of ITS OWN moment -
  blurring history with the current tick's boxes would leave a face exactly
  where it actually was (PIPA).
- Right after startup the ring is short: fewer frames go out, never zero and
  never duplicated. Detail view captions the sequence 이전/직전/발생 시점 by
  position (offsets are edge config the server doesn't know).

24h catch-up brief:
- The events console renders one line above the stream on load - "지난 24시간
  - 감지 N건 (중대 n) · 니어미스 n · 평균 대응 t · 미확인 n건 남음" - reusing
  GET /api/report?days=1, with a link into /report. High-tinted when the
  window held critical/high events; hidden entirely until data arrives.

Verified: pytest 235 pass (3 new: timeline selection, short-buffer dedup,
3-frame capture through run_once) / PHPUnit 138 pass + Chrome real-render
(brief line with severe tint on the console; detail page showing the
3-frame timeline with captions; no console errors).
2026-08-07 07:25:25 +09:00
유창욱
b358822247 feat(ergo): posture-load exposure scoring (REBA bands) with anonymous reports
Same pose stream, new safety axis: musculoskeletal-load prevention. This is an
honest 2D reduction of REBA - band exposure TIME, not a precise REBA score.

Edge:
- geometry: arm_elevation_deg (shoulder->elbow vs vertical-down, best of both
  arms) and knee_flexion_deg (hip-knee-ankle interior angle, worst of both
  legs). Both return None when no confident side exists - "unmeasurable" must
  never read as "0 deg / straight".
- detectors/ergonomics.py: per-frame dt accumulation into bands (trunk 20-60
  and 60+ deg via the existing torso angle, arm 90+ deg, knee <110 deg), gated
  on confident core keypoints; detection gaps are dt-capped (2s) so a dropout
  never counts as exposure. Hourly per-camera report, skipped when nothing was
  observed (an empty-workshop report is noise).
- Engine: tracks in an incident state (FALLING/FALLEN/NO_MOTION) are excluded
  - a fallen worker's 90-deg trunk is an incident, not an ergonomic exposure.
  The report event (ergo_report/INFO) carries no track_id and no spatial:
  a camera-level anonymous aggregate, per the PIPA-first product stance.
- run_once: NO snapshots on ergo_report (a frame would turn a statistic into
  surveillance imagery); capture is skipped entirely when only ergo fired.

Server/UI: ergo_report accepted (validator + chk_events_type, edited in the
still-undeployed heatmap migration); detail view now renders event metrics
with Korean labels and seconds humanized - the ergo report's whole value IS
its metrics. Korean type label in list + detail.

Verified: pytest 232 pass (10 new) / PHPUnit 135 pass. NOTE: the detail-view
visual check is pending - the Chrome extension disconnected mid-verification;
harness is staged under the session scratchpad (events/1/view).
2026-08-06 21:46:39 +09:00
유창욱
32f2237db7 fix(edge): close audit P2-6/7/8 - id swaps, one-frame FALLING, stale-track timers
- P2-6 tracking: global greedy IoU matching (all pairs, best overlap first)
  replaces track-iteration-order greedy, so a crossing worker's box can no
  longer be stolen by whichever track came first. Any track in a contended
  match (person overlapping 2 tracks, or track overlapping 2 persons) is
  reported via tracker.ambiguous(); run_once resets its detector + smoother
  state so FALLEN/baseline/immobility never ride an id swap onto the wrong
  person. A genuinely fallen worker re-confirms within prone_confirm_s.
- P2-7 fall: STANDING -> FALLING now requires sustained prone
  (falling_confirm_s, 1.0s). One prone-looking frame (a bend, a bbox glitch)
  no longer arms the ghost detector's CRITICAL if the person then leaves.
  FALLEN / no_motion timing is unchanged (keyed off prone_since).
- P2-8 app: run_once feeds the engine and smoothers only tracks re-detected
  this tick; a track coasting inside max_age with a frozen frame is no-data,
  so prone-confirm / no-motion / immobility timers cannot accrue on stale
  data. Re-detection still confirms the fall (dropout pauses evidence).

TDD: 7 new tests verified failing on the pre-fix code (git stash), then
203 passed / 2 skipped (hardware) with the fixes.
2026-08-06 17:01:24 +09:00
유창욱
752afc3f00 feat(edge): heartbeat telemetry + monotonic timers + queue/camera robustness
- Split clocks: detector timers/cooldowns run on a MONOTONIC clock (immune to an
  NTP step on an RTC-less Pi); wall time is used only for the HMAC X-Timestamp
  and Event.occurred_at. Fixes false IMMOBILITY / dropped tracks after a clock jump.
- Heartbeat is time-based (30s, predictable regardless of load) and now carries
  temp/throttle/queue_pending/config_version telemetry.
- A dead (no-frame) camera counts as erroring instead of a healthy frame, so a
  silent monitoring outage no longer looks green.
- Offline queue: isolate one undecodable row instead of wedging every event behind
  it; classify 401 (stale clock) as transient, never a poison-drop.
- New edge/health.py: vcgencmd temp/throttle parsing, None off-Pi (no fake 0).
2026-07-25 19:20:23 +09:00
유창욱
7a86545367 feat(delivery-audit): privacy — face-blur sizing + model integrity (P3-1, P3-3)
- P3-1 [H] _head_boxes sizes the anonymization region from the person bbox (scales with
  distance) + bbox-top fallback when the nose keypoint is low-confidence; a fixed ~40px
  patch had left close faces identifiable. test_faceblur.py.
- P3-3 [H] fetch_movenet.py rewritten to stage-validate (reject HTML/LFS-pointer, optional
  pinned sha256+size, fail loud) per the SHA256 spec requirement. Discovery: the old PINTO
  raw URL is DEAD (GitHub 404 → it was silently saving an HTML page as the .onnx). Non-blocking
  for the Hailo delivery path; the CPU MoveNet fallback needs a valid MOVENET_ONNX_URL pinned.

python + phpunit suites green.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Xmn8KZWqiQUguEMRtn6rW
2026-07-17 09:35:02 +09:00
유창욱
9386dfc580 feat(delivery): install-path fixes + cafe24 package + delivery-audit hardening
Three intertwined bodies of work developed and tested together this session.
Full test suite green: python (edge) + phpunit (cloud).

## Edge/Pi install path
- setup_online.sh: apt-lock retry (apt-daily contention), Type=exec unit +
  StartLimitIntervalSec in [Unit], journalctl-on-failure, crash-loop detection.
- onnxruntime is now best-effort (no sdist / no 32-bit-ARM wheel); [6/8] probes the
  real backend and hard-fails if none works.
- Hailo HEF auto-fetch: edge/tools/fetch_hailo_hef.py (pinned sha256, refuses to guess
  8 vs 8L, HAILO_ARCH override for serial-less boards); hailo_pose.py run() timeout fix.
- install_offline.sh: mirrors the backend gate; onnxruntime optional.

## Cafe24 cloud package (cloud/deploy/)
- build_cafe24_package.sh emits move_detect_app/ (private, one folder) + www/move_detect/
  (docroot subdir); no-dev classmap autoloader; preflight.php; hardened .htaccess.
- Subdirectory mount support: Request::baseFrom/pathFor strip the mount prefix; index.php
  walks up to find the app root; views/JS prefix every URL with APP_BASE; session cookie
  scoped to the mount.

## Delivery audit — silent-failure & correctness (docs/delivery-audit.md)
All 4 blockers + all Phase-1 silent-failure + Phase-2 HIGH correctness:
- Edge cloud clients send a custom User-Agent (cafe24 WAF blocks python-requests) and
  allow_redirects=False.
- Daemon fails loud on blank CAFE24_URL/DEVICE_SECRET; run_loop logs swallowed exceptions;
  heartbeat carries real fps + per-camera health; UvcSource reopens a dead camera;
  offline queue is size-capped and drops poison rows; TARGET_FPS/QUEUE_DB validated.
- Zone coordinates normalized 0..1 on both sides (were canvas-px vs camera-px — every zone
  misplaced); pinch zones emit PINCH/HIGH (were downgraded to WARNING).
- Fall detection uses bbox cues when keypoints are low-confidence (occluded fallen person);
  ghost incident not cancelled by a bystander; displacement normalized per-second (FPS-invariant).

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Xmn8KZWqiQUguEMRtn6rW
2026-07-17 09:07:33 +09:00
유창욱
01c7f4636e fix(edge): smooth keypoints per-track after tracking, not before (FIX 1)
edge/app.py run_once used ONE shared KeypointSmoother across all persons
BEFORE tracking assigned IDs. The smoother holds per-joint-index One-Euro
filter state, so with >1 person in frame the filter state was shared and
corrupted across different people, and same-timestamp calls within a frame
would pass through unsmoothed while still clobbering the shared state.
Multi-person scenes could get corrupted torso angles -> missed/false falls.

Add TrackSmootherPool (edge/smoothing.py) that lazily allocates one
KeypointSmoother per track_id. run_once now: tracks raw keypoints first,
then smooths each track's latest frame in place using its own pooled
smoother, and forgets a track's smoother when the track is lost (ties into
FIX 5 lost-track cleanup).

BEHAVIOR CHANGE: keypoints are now smoothed after tracking instead of
before. Single-person pipelines are unaffected (still one smoother, one
identity). Multi-person pipelines get correct, non-cross-contaminated
smoothing.

run_once signature: smoother param replaced with pool: TrackSmootherPool.
build_pipeline now constructs "pool" instead of "smoother".

Tests: tests/test_smoothing.py adds TrackSmootherPool identity/forget
coverage; tests/test_app.py adds test_two_persons_get_independent_smoothing
demonstrating each track's smoothed keypoints stay on its own side instead
of being pulled toward the other person.
2026-07-11 22:14:03 +09:00
유창욱
b621627863 feat(edge): main-loop wiring (run_once) + pipeline factory 2026-07-11 21:46:43 +09:00