move_detect/deploy

Edge deployment (Raspberry Pi 5, air-gapped / 폐쇄망)

Offline-installable bundle + systemd unit for the move-detect edge daemon. The bundle is fully self-contained (all wheels + pose model + source): the Pi performs zero network fetches at install or run time. The only runtime network use is the server POST / config-poll / heartbeat, and even that tolerates being offline (events buffer in the local sqlite queue and flush on reconnect).

Scope: the delivered bundle is Hailo-8 + yolov8s_pose.hef, which build_offline_bundle.sh fetches (sha256-pinned) and stages into models/. The CPU MoveNet fallback is not bundled: its upstream ONNX URL 404s, so install_offline.sh configures the unit for whatever backend is actually present and refuses to install if none is. Camera side: USB (UVC) and CSI are both wired; CSI needs hailo-all/picamera2 from the Pi OS image. Device validation for both is docs/hardware-bringup.md (still OFF-HW).

Files

File	Runs on	Purpose
bundle/build_offline_bundle.sh	build machine (has internet)	downloads wheels + model, stages source, emits one tarball
bundle/install_offline.sh	the Pi (no internet)	venv + --no-index install, systemd unit, service account
systemd/move-detect-edge.service	the Pi	the daemon unit (auto-restart, device access, hardening)
systemd/move-detect-edge.env.example	the Pi	env template → /etc/move-detect/edge.env

Quick start — Pi with internet (one command)

If the Pi itself has internet, skip the offline bundle entirely. Copy the built delivery folder onto the Pi — copy the working tree, not a fresh git clone: the pose model models/yolov8s_pose.hef is git-ignored (a build artifact), so a clone arrives without it. Use scp -r/USB from a build machine that has already staged models/ (see step 1). Then:

sudo deploy/setup_online.sh

It installs the system packages (python3-picamera2, and hailo-all if present), builds the venv, pip-installs the runtime deps, places the pose model from the delivery's models/ (it does NOT download models on the Pi — the HEF/ONNX are fetched on the build machine per the air-gap rule, build pulls, target doesn't), writes /etc/move-detect/edge.env (prompting for DEVICE_ID / DEVICE_SECRET / CAFE24_URL / CAMERAS, or take them from env vars), probes every camera, installs the systemd unit, and starts the service. It uses Hailo when models/yolov8s_pose.hef is present (or pass HAILO_HEF=/path/to.hef), else CPU MoveNet when models/movenet_lightning.onnx + onnxruntime are present. The rest of this doc is the air-gapped path.

Secret handling (deploy/device.env)

If you pre-provision with deploy/device.env, that file holds this device's HMAC secret in plaintext. It is gitignored (never committed), but it rides onto the Pi with the "copy the working tree" transfer. After a successful install:

1. Delete it: shred -u deploy/device.env (the live secret now lives only in /etc/move-detect/edge.env, 0640 root:movedetect). The installer already chmod 600s it while running, but that is defense-in-depth, not a substitute for removing it.
2. Rotate if it was ever exposed (shared over chat, a shell history, a shared drive): update move_devices.secret on the server and the DEVICE_SECRET in the Pi's /etc/move-detect/edge.env, then restart the service. A leaked secret lets anyone forge signed events/heartbeats for this device.

Prefer device.env over passing DEVICE_SECRET=... on the sudo command line, which leaves the secret in the shell history.

---

1. Build the bundle (on a machine WITH internet)

Most reliable: build on an aarch64 host (a Pi 5, or an arm64 CI runner) so the downloaded wheels match the target exactly:

deploy/bundle/build_offline_bundle.sh            # native aarch64 wheels

From an x86 box you can attempt a cross build (best-effort — onnxruntime/opencv wheel tags may not resolve; if it fails, build natively):

deploy/bundle/build_offline_bundle.sh --cross    # target aarch64 / cp311

Output: the folder dist/2_pi_install/ (+ MANIFEST.txt listing the bundled wheels). Copy the WHOLE FOLDER across the air gap as-is — no archive step. Set MAKE_TARBALL=1 if you would rather transfer one file. The tarball is named dist/move-detect-pi-<VERSION>-<YYYYMMDD>-aarch64-cp311-hailo8.tar.gz — version and build date so a site can say exactly what it is running, and the arch/ABI/Hailo triple because a hailo8 and a hailo8l bundle are byte-different and crash-loop on the wrong board.

2. Transfer + install (on the air-gapped Pi)

Copy dist/2_pi_install/ across the gap (USB, one-way transfer, etc.), then:

# tarball variant only (MAKE_TARBALL=1): tar xzf move-detect-pi-<VERSION>-<날짜>-aarch64-cp311-hailo8.tar.gz
cd 2_pi_install
sudo ./install_offline.sh

The installer: creates the movedetect service account (in video/render/ plugdev/hailo groups), lays down source + model under /opt/move-detect, builds a venv and installs the bundled wheels with --no-index, verifies the package imports, seeds /etc/move-detect/edge.env, and installs the systemd unit.

3. Configure + start

sudo nano /etc/move-detect/edge.env      # DEVICE_ID, DEVICE_SECRET, CAFE24_URL, ...
sudo systemctl enable --now move-detect-edge
journalctl -u move-detect-edge -f

DEVICE_ID/DEVICE_SECRET must match a move_devices row in the server (see server/docs/server-deploy.md §6). HAILO_HEF points at the bundled model (/opt/move-detect/models/yolov8s_pose.hef); the installer sets it for you and only falls back to MOVENET_ONNX if a MoveNet bundle was built.

4. Verify the air gap (do this before trusting a build)

• On a host with networking disabled, install_offline.sh completes — the --no-index installs prove nothing is fetched. If pip tries to reach PyPI, a wheel is missing from the bundle: rebuild (step 1) natively.
• Step [4/6] of the installer prints edge import OK (cv2 + numpy + requests import from the venv; onnxruntime only if a MoveNet bundle was built).
• systemctl status move-detect-edge is active (running); the log shows frames processed and (if the server is reachable) heartbeats.
• Pull the network cable → events keep queueing (QUEUE_DB grows) → restore → the queue flushes. (End-to-end behavior verified in the edge e2e harness.)

Hailo-8 HAT + CSI camera path (optional, faster)

The default bundle runs CPU MoveNet + USB webcam. To use the Hailo-8 accelerator and/or a CSI camera, add these SYSTEM packages on the Pi (they are apt packages, not pip wheels — the venv sees them because it is created with --system-site-packages):

sudo apt install -y hailo-all python3-picamera2 python3-opencv

• hailo-all — HailoRT runtime + driver + the Python hailo_platform bindings.
• python3-picamera2 — CSI camera stack (libcamera).

Then place the pose model and switch backends in /etc/move-detect/edge.env:

POSE_BACKEND=hailo
HAILO_HEF=/opt/move-detect/models/yolov8s_pose.hef   # copy the compiled HEF here
CAMERA_BACKEND=csi
CSI_DEVICE=0

Validate on device per docs/hardware-bringup.md before trusting output (the Hailo decode is unit-locked, but the HailoRT inference + picamera2 color order are hardware- validated). USB webcam stays available anytime via CAMERA_BACKEND=uvc.

Multiple cameras at once. Set CAMERAS=backend:device:camera_id,... to run several cameras in one daemon — each gets its own detection pipeline and camera_id, they share the Hailo device (round-robin) and the offline queue, and server zones are routed to the matching camera. Example — CSI + USB together:

CAMERAS=csi:0:cam-01,uvc:0:cam-02

Each camera_id must match the camera_id on that camera's zones in the server.

Air gap: hailo-all / python3-picamera2 are the ONE piece this bundle can't carry (Hailo's own driver + apt tree). Pre-install them on the Pi image, or transfer their .debs separately, before running install_offline.sh. The pose HEF is likewise supplied out-of-band (compiled from the Hailo Model Zoo).

Not bundled (by design)

• MySQL / the server app — a separate host; see server/docs/server-deploy.md.
• HailoRT + picamera2 — Hailo's runtime/driver and the CSI camera stack are Pi system packages, installed out-of-band (above). Note the HEF itself is bundled (models/yolov8s_pose.hef); only the driver is not.
• python3-venv — install_offline.sh runs python3 -m venv, which Pi OS Lite does not always include. Install it with the Hailo packages, before going air-gapped.
• MoveNet ONNX (CPU fallback) — its upstream URL 404s, so the bundle is Hailo-only. If you need the CPU path, supply the ONNX to the build machine and rebuild.