move_detect/server/tests/SafetyConfigTest.php
유창욱 e00ad69aa3 feat(safety,ux): 통보·억제·증거 체계 신설 + UI/UX 감사 21건 반영
UI/UX 점검에서 시작해 "이 제품이 안전 시스템으로서 무엇이 없나"까지 내려간 작업.
두 덩어리를 한 커밋으로 둔다 — 뒤쪽 기능들이 앞쪽에서 고친 화면 위에 얹혀 있다.

━━ 1부: UI/UX 감사 21건 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

동선 — 확인(ack) 경로가 위험했다
- 스트림 정렬을 '미확인 우선'에서 엄격 시간순으로 되돌린다. 확인 상태가 연대기를
  뒤집어 사고 재구성이 불가능했고, 확인하면 그 행이 목록 밖으로 사라지며 아래 행이
  밀려 올라와 같은 좌표를 두 번 누르면 다른 이벤트가 확인 처리됐다. 이제 제자리에서
  '확인됨'으로 전환되고 확정 토스트가 뜬다. 처리 큐는 정렬이 아니라 뷰모드 필터로 분리
  (전환해도 행끼리 상대 순서는 절대 안 바뀐다).
- 실행취소는 넣지 않았다. acknowledged_by는 감사로그가 함께 남는 추가 전용 기록이라
  무음 되돌리기가 안전 시스템에서 더 나쁜 속성이다. 대신 오탐·구역삭제를 2단계 확정으로.
- 이벤트 상세에 확인/오탐 신설. 판단하는 화면에 판단 도구가 없었다.
- 구역 설정에 장치·카메라 선택기. 시스템이 아는 값을 사람에게 묻고 있었고,
  플레이스홀더(device-01)마저 실제와 다른 포맷을 가르쳤다.
- 날짜 조회(키셋 커서 시딩). 사고 조사 진입로가 아예 없어 '더 보기'를 반복해야 했다.
- 경보음 세션 음소거(새 위급 도착 시 자동 해제). 끌 수 없는 반복음은 안전 콘솔이
  통째로 꺼지는 경로다.

전달 — 같은 단어가 화면마다 다른 숫자를 가리켰다
- KPI '미확인'(최근 200건)과 24시간 브리프 '미확인'이 40px 간격으로 충돌했다.
  KPI에 실제 집계 범위를 명시. 중대=위급+높음을 인라인 정의.
- 페이지 명칭 3종·날짜 포맷 3종 통일. '확인 필요' 칩을 전 심각도로 확장
  (그전엔 확인 여부가 먼 컬럼의 버튼 유무로만 구분됐다).
- 표본 게이트: 오탐율 '100% (1/1)'이 '33% (5/15)'보다 위에 뜨던 것, 최다 3건짜리
  시간패턴 히트맵, 6→8건에 붙던 빨간 ▲33%. 개선조치 효과는 푸아송 잡음 범위(√before)를
  넘어야 방향을 주장한다 — 안전회의에서 한 번 반박당하면 카드 전체가 신뢰를 잃는다.
- 카메라 위험 순위가 중대>0이면 전부 빨강이라 순위 노릇을 못 했다. 상대 기준으로.

시각 — 화면마다 완성도가 달랐다
- 구역 설정·이벤트 상세를 카드 셸로 재구성. 둘 다 스타일 없는 기본 폼이었고,
  납품 심사에서 "덜 만든 티"는 정확히 거기서 났다.
- 히트맵 토글은 aria-pressed만 있고 CSS 규칙이 없어 켜졌는지 눈으로 알 수 없었다.
- 존 색을 팔레트와 정합(팔레트 어디에도 없던 보라 제거), 채움+라벨칩+협착 점선.
  캔버스에 1px 외곽선만 그리면 실제 공장 프레임에서 사라진다.

━━ 2부: 안전 플랫폼 (마이그레이션 2026-08-09-safety-platform.sql) ━━━

통보 — 이 제품의 정의에 해당하는 구멍
  지금까지 감지는 브라우저 탭이 열려 있고 사람이 보고 있어야만 전달됐다. 새벽 3시에
  넘어진 작업자는 DB에 행 하나를 남기고 아침을 맞았다.
- 엣지 GPIO 경광등(edge/beacon.py). 인터넷·서버 없이 동작하는 유일한 경로라
  어떤 현장이든 이것부터 설정한다. /api/config의 beacons로 배선을 받고, 하드웨어가
  없거나 핀이 안 열리면 NullBeacon으로 떨어지되 그 사실은 반드시 로그로 남긴다.
- 메일·웹훅 채널 + 크론 디스패처(tools/dispatch_alerts.php). 중복 발송은 읽고-쓰기가
  아니라 (event,channel) UNIQUE로 막는다 — 크론 중첩 실행은 공유호스팅의 상수다.
- 미확인 위급은 unacked_escalation 이벤트가 되어 상위 채널로 올라간다(event_uuid로 멱등).
  '아무도 보지 않았다'는 사실 자체를 사건으로 만든다.
- 통보에 이미지는 싣지 않는다. 스냅샷은 PIPA 대상이고 메일링 리스트로 나가는 순간
  인증 프록시가 지키던 통제를 벗어난다 — 링크만 보낸다.

조용한 실패 제거
- 카메라 화각 이동·가림·조도 저하 감지(detectors/integrity.py). 존 판정은 화각 고정을
  전제로 서 있는데, 삼각대를 스치면 제한구역이 엉뚱한 바닥을 가리키면서 시스템은 계속
  초록불이었다. numpy만 사용하고, 지나가는 사람과 구분하기 위해 지속시간을 요구한다.
- 스토리지 여유 감시. 디스크가 차면 이미지 저장만 조용히 실패하고 보드는 멀쩡해 보인다.

끊겨 있던 배선 2건
- thresholds_from_config()가 정의만 있고 어디서도 호출되지 않았다. 서버에 표가 있고
  /api/config가 성실히 실어 보내고 엣지가 파싱한 뒤 버렸다 — 관리자가 무엇을 바꿔도
  장비는 부팅 시 edge.env 값으로 영원히 돌았다(edge/tuning.py).
- 존·임계값 저장이 config_version을 올리지 않아 '설정 지연' 표시가 애초에 켜질 수
  없었다. 지표는 있는데 그것을 켜는 사건이 없었다.

관리 화면 (그전에는 phpMyAdmin이 유일한 방법이었다)
- 임계값 편집: 자유 텍스트가 아니라 카탈로그(범위·단위·설명)로 렌더한다. 범위 밖 값은
  엣지가 기동 시 거부하는데 그때는 이미 공장 안 장비가 재시작 루프다. 키보드 앞에서 막는다.
  목록에 없는 키는 저장 불가 — 장비가 조용히 무시할 값이 '설정됨'으로 보이면 안 된다.
- 정비 억제: 사유 필수, 최대 8시간(한 교대), 자동 만료. 감지와 기록은 그대로 계속되고
  통보만 보류되며 그 보류도 원장에 status='suppressed'로 남는다 — 조사에서 '경보가 났지만
  의도적으로 withheld됐다'를 볼 수 있어야 한다.
- 교대 인수인계, 위험성평가, 설비 성능 추이, 설치 점검(/setup — 실제 상태 조회 기반).

증거·규정
- 감사로그 해시체인. 공유호스팅은 append-only 권한을 줄 수 없으니 '막는' 대신 '숨길 수
  없게' 만든다. 수정·삭제·우회삽입이 전부 탐지되고(tools/verify_audit_chain.php, 손상 시
  exit 1), 체인 이전 행은 손상이 아니라 '검증 불가 구간'으로 따로 센다 — 정상 시스템이
  매번 빨간불을 켜면 아무도 이 도구를 안 본다.
- 사고조사 패키지 1클릭: 전후 타임라인 + 통보 이력(누구에게 닿았는가) + 위험요인 +
  조치 이력 + 서명란. 인쇄 CSS로 그대로 제출 가능. 사고 다음 날 반나절을 쓸 사람은 없다.
- 이벤트→조치 직접 기록, 현장별 롤업(전역 계정만).

운영
- 일괄 확인(위급은 의도적으로 제외·2단계 확정), 키보드 트리아지(J/K/A/F/Enter),
  모바일 레이아웃(44px 타깃), 보존기간 정리(tools/maintain.php),
  백업/복구(tools/backup.php — www 안 출력은 거부), 데모 시드(tools/seed_demo.php).
- tools/는 전부 CLI 전용이고 납품 시 move_detect_app/tools/에 www 밖으로 배치된다.

미착수 4건 (모델·하드웨어가 선행 조건)
- 보호구·중장비 근접·화재 감지는 AGPL 아닌 가중치 확보 + HEF 컴파일이 관문이다.
  감지기 배선·이벤트 계약·심각도·쿨다운·테스트까지 만들고 기본 비활성으로 둔다
  (edge/detectors/pending.py). enabled=True인데 model=None이면 아무것도 하지 않도록
  명시적으로 막았다 — "곧 됩니다" 상태로 켜 두면 현장은 감지되고 있다고 믿는다.
- PLC 접점 협착 게이팅도 같은 이유로 인터페이스만.

검증: pytest 통과(skip 3 = 하드웨어·환경) / PHPUnit 221 (skip 0, +59).
Chrome 실렌더로 신규 4화면 + 임계값 저장→config_version 증가→감사 기록→체인 검증→
행 변조→탐지(exit 1) 전 경로 확인. cafe24 번들 + Pi 오프라인 번들(aarch64 휠 11개)
재생성, 소스 패리티 통과. 보안 자체점검: SQL 문자열 보간 0, innerHTML 0,
상태 변경 핸들러 전부 CSRF+RBAC.
2026-08-18 07:51:23 +09:00

328 lines
16 KiB
PHP

<?php
declare(strict_types=1);
namespace App\Tests;
use App\Api\ThresholdCatalog;
use App\Http\Request;
use App\Auth\ArraySessionStore;
use App\Dashboard\{AdminConfigController, SuppressionController, ComplianceController};
use App\Tests\Support\{InMemoryThresholdRepository, InMemoryAlertRepository, InMemoryDeviceRepository,
InMemoryAuditRepository, InMemorySuppressionRepository, InMemoryEventRepository,
InMemorySnapshotRepository, InMemoryActionRepository, InMemoryRiskControlRepository,
InMemoryHandoverRepository};
use PHPUnit\Framework\TestCase;
/**
* Threshold editing, alarm suppression and the compliance surfaces.
*
* These are the screens that let a delivered site tune and operate itself. Before them the
* customer's only route to a threshold was phpMyAdmin, and their only route to silencing a
* maintenance window was to ignore the alarms — which is how a safety console ends up switched
* off.
*/
final class SafetyConfigTest extends TestCase
{
private function sess(string $role = 'admin', ?string $site = null): ArraySessionStore
{
$s = new ArraySessionStore();
$s->set('user_id', 1); $s->set('username', '관리자'); $s->set('role', $role); $s->set('csrf', 'tok');
if ($site !== null) $s->set('site_scope', $site);
return $s;
}
private function post(array $body): Request
{
return new Request('POST', '/x', ['X-Csrf-Token' => 'tok'], json_encode($body), [], []);
}
private function get(array $query = []): Request
{
return new Request('GET', '/x', [], '', $query, []);
}
// ================================================================ thresholds
private function admin(string $role = 'admin', ?string $site = null,
?InMemoryThresholdRepository $thr = null,
?InMemoryDeviceRepository $dev = null,
?InMemoryAuditRepository $audit = null,
?InMemoryAlertRepository $alerts = null): AdminConfigController
{
return new AdminConfigController(
$thr ?? new InMemoryThresholdRepository(),
$alerts ?? new InMemoryAlertRepository(),
$dev ?? new InMemoryDeviceRepository(['pi-1' => 's'], ['pi-1' => 1]),
$audit ?? new InMemoryAuditRepository(),
$this->sess($role, $site)
);
}
public function testThresholdEditingIsAdminOnly(): void
{
$this->assertSame(403, $this->admin('operator')->thresholds($this->get())->status());
$this->assertSame(403, $this->admin('viewer')->thresholds($this->get())->status());
$this->assertSame(200, $this->admin('admin')->thresholds($this->get())->status());
}
public function testCatalogTravelsWithTheValuesSoTheEditorCanBoundItsInputs(): void
{
$res = $this->admin()->thresholds($this->get());
$data = json_decode($res->body(), true);
$this->assertArrayHasKey('fall_prone_s', $data['catalog']);
// assertEquals, not assertSame: a whole float survives the JSON round trip as an int.
$this->assertEquals(30.0, $data['catalog']['fall_prone_s']['max']);
$this->assertEquals(1.0, $data['catalog']['fall_prone_s']['min']);
}
public function testOutOfRangeValueIsRejected(): void
{
$c = $this->admin();
$res = $c->saveThreshold($this->post(['device_id' => 'pi-1', 'key' => 'fall_prone_s', 'value' => 900]));
$this->assertSame(400, $res->status());
$this->assertSame('out_of_range', json_decode($res->body(), true)['error']);
}
public function testNonFiniteValueIsRejected(): void
{
// edge/config.py 가 기동 시 거부하는 바로 그 값들 — 그때는 이미 공장 안 장비가
// 재시작 루프에 빠진 뒤다. 키보드 앞에서 막는다.
foreach (['nan', 'inf', '-inf'] as $bad) {
$res = $this->admin()->saveThreshold(
$this->post(['device_id' => 'pi-1', 'key' => 'cooldown_s', 'value' => $bad]));
$this->assertSame(400, $res->status(), "rejects $bad");
}
}
public function testUnknownKeyIsRejectedRatherThanDeliveredAndIgnored(): void
{
$res = $this->admin()->saveThreshold(
$this->post(['device_id' => 'pi-1', 'key' => 'fall_prone_seconds', 'value' => 3]));
$this->assertSame(400, $res->status());
$this->assertSame('unknown_key', json_decode($res->body(), true)['error']);
}
public function testSaveBumpsConfigVersionSoTheChangeReachesTheDevice(): void
{
$dev = new InMemoryDeviceRepository(['pi-1' => 's'], ['pi-1' => 4]);
$c = $this->admin('admin', null, null, $dev);
$this->assertSame(200, $c->saveThreshold(
$this->post(['device_id' => 'pi-1', 'key' => 'fall_prone_s', 'value' => 5]))->status());
$this->assertSame(5, $dev->configVersion('pi-1'),
'버전이 오르지 않으면 값은 DB 에만 남고 장비는 옛 설정으로 계속 돈다');
}
public function testSaveIsAudited(): void
{
$audit = new InMemoryAuditRepository();
$c = $this->admin('admin', null, null, null, $audit);
$c->saveThreshold($this->post(['device_id' => 'pi-1', 'key' => 'fall_prone_s', 'value' => 5]));
$this->assertCount(1, $audit->log);
$this->assertSame('threshold_set', $audit->log[0]['act']);
}
public function testScopedAdminCannotRetuneAnotherSitesDevice(): void
{
$dev = new InMemoryDeviceRepository(['pi-1' => 's'], ['pi-1' => 1], [], ['pi-1' => 'factory-a']);
$c = $this->admin('admin', 'factory-b', null, $dev);
$this->assertSame(404, $c->saveThreshold(
$this->post(['device_id' => 'pi-1', 'key' => 'fall_prone_s', 'value' => 5]))->status());
}
public function testCsrfIsRequired(): void
{
$c = $this->admin();
$noToken = new Request('POST', '/x', [], json_encode(['device_id' => 'pi-1', 'key' => 'fall_prone_s', 'value' => 5]), [], []);
$this->assertSame(403, $c->saveThreshold($noToken)->status());
}
public function testIntegerKnobRejectsAFraction(): void
{
[$ok, $err] = ThresholdCatalog::normalize('infer_every', 1.5);
$this->assertFalse($ok);
$this->assertSame('not_integer', $err);
}
public function testNormalizationIsStableSoOneValueHasOneStoredForm(): void
{
[, $a] = ThresholdCatalog::normalize('fall_prone_s', '3');
[, $b] = ThresholdCatalog::normalize('fall_prone_s', 3.0);
[, $c] = ThresholdCatalog::normalize('fall_prone_s', '3.000');
$this->assertSame($a, $b);
$this->assertSame($b, $c);
}
// ================================================================ alert channels
public function testWebhookTokenIsNeverEchoedBack(): void
{
$alerts = new InMemoryAlertRepository();
$c = $this->admin('admin', null, null, null, null, $alerts);
$c->saveChannel($this->post(['kind' => 'webhook', 'name' => 'groupware', 'enabled' => 1,
'min_severity' => 'high', 'config' => ['url' => 'https://in.house/hook', 'token' => 'SECRET']]));
$body = json_decode($c->channels($this->get())->body(), true);
$this->assertSame('••••••••', $body['channels'][0]['config']['token'],
'설정 화면을 화면공유해도 연동 키가 새지 않아야 한다');
}
public function testEscalationStepRequiresADelay(): void
{
$c = $this->admin();
$res = $c->saveChannel($this->post(['kind' => 'email', 'name' => 'manager', 'enabled' => 1,
'min_severity' => 'critical', 'step' => 1, 'escalate_after_s' => 0,
'config' => ['to' => 'a@b.c']]));
$this->assertSame(400, $res->status(), '지연 0 짜리 에스컬레이션은 즉시 채널과 같이 울린다');
}
public function testWebhookRejectsNonHttpUrl(): void
{
$c = $this->admin();
$res = $c->saveChannel($this->post(['kind' => 'webhook', 'name' => 'x', 'enabled' => 1,
'min_severity' => 'high', 'config' => ['url' => 'file:///etc/passwd']]));
$this->assertSame(400, $res->status());
}
public function testEmailChannelNeedsAValidRecipient(): void
{
$c = $this->admin();
$res = $c->saveChannel($this->post(['kind' => 'email', 'name' => 'x', 'enabled' => 1,
'min_severity' => 'high', 'config' => ['to' => 'not-an-email']]));
$this->assertSame(400, $res->status());
}
// ================================================================ suppression
private function suppression(string $role = 'operator', ?string $site = null,
?InMemorySuppressionRepository $repo = null,
?InMemoryEventRepository $events = null): SuppressionController
{
$ev = $events ?? new InMemoryEventRepository();
return new SuppressionController(
$repo ?? new InMemorySuppressionRepository(), $ev,
new InMemoryDeviceRepository(['pi-1' => 's'], ['pi-1' => 1]),
new InMemoryAuditRepository(), $this->sess($role, $site)
);
}
public function testSuppressionRequiresAReason(): void
{
$res = $this->suppression()->create($this->post(
['scope_type' => 'device', 'scope_id' => 'pi-1', 'minutes' => 30, 'reason' => '']));
$this->assertSame(400, $res->status());
$this->assertSame('reason_required', json_decode($res->body(), true)['error']);
}
public function testSuppressionCannotBeOpenEnded(): void
{
$c = $this->suppression();
// 8시간(한 교대) 상한. 그 이상은 의도적인 재발급을 강제한다.
$this->assertSame(400, $c->create($this->post(['scope_type' => 'device', 'scope_id' => 'pi-1',
'minutes' => 60 * 24, 'reason' => '정비']))->status());
$this->assertSame(201, $c->create($this->post(['scope_type' => 'device', 'scope_id' => 'pi-1',
'minutes' => 60 * 4, 'reason' => '프레스 금형 교체']))->status());
}
public function testViewerCannotSuppress(): void
{
$this->assertSame(403, $this->suppression('viewer')->create($this->post(
['scope_type' => 'device', 'scope_id' => 'pi-1', 'minutes' => 30, 'reason' => '정비']))->status());
}
public function testUnknownScopeTargetIsRejected(): void
{
$res = $this->suppression()->create($this->post(
['scope_type' => 'device', 'scope_id' => 'pi-nope', 'minutes' => 30, 'reason' => '정비']));
$this->assertSame(400, $res->status());
}
public function testRevokeIsScoped(): void
{
$repo = new InMemorySuppressionRepository();
$id = $repo->create(['scope_type' => 'device', 'scope_id' => 'pi-1', 'site' => 'factory-a',
'reason' => 'x', 'starts_at' => time() - 10, 'ends_at' => time() + 600,
'created_by' => 'a', 'created_at' => time()]);
$c = $this->suppression('operator', 'factory-b', $repo);
$this->assertSame(404, $c->revoke($this->post([]), ['id' => $id])->status());
}
// ================================================================ compliance
private function compliance(string $role, ?string $site, InMemoryEventRepository $events,
?InMemoryRiskControlRepository $risks = null,
?InMemoryHandoverRepository $handovers = null): ComplianceController
{
return new ComplianceController(
$events, new InMemorySnapshotRepository(), new InMemoryActionRepository(),
new InMemoryAlertRepository(), $risks ?? new InMemoryRiskControlRepository(),
$handovers ?? new InMemoryHandoverRepository(), new InMemoryAuditRepository(),
$this->sess($role, $site)
);
}
public function testIncidentPackageCarriesTheSurroundingTimeline(): void
{
$events = new InMemoryEventRepository();
$at = (float)time();
$before = $events->insert(['device_id' => 'pi-1', 'camera_id' => 'cam-1', 'event_type' => 'near_fall',
'severity' => 'warning', 'occurred_at' => $at - 300, 'metrics' => []]);
$main = $events->insert(['device_id' => 'pi-1', 'camera_id' => 'cam-1', 'event_type' => 'fall',
'severity' => 'critical', 'occurred_at' => $at, 'metrics' => []]);
$after = $events->insert(['device_id' => 'pi-1', 'camera_id' => 'cam-1', 'event_type' => 'no_motion',
'severity' => 'critical', 'occurred_at' => $at + 30, 'metrics' => []]);
// 다른 카메라의 동시 사건은 들어오면 안 된다.
$events->insert(['device_id' => 'pi-1', 'camera_id' => 'cam-2', 'event_type' => 'fall',
'severity' => 'critical', 'occurred_at' => $at, 'metrics' => []]);
$res = $this->compliance('operator', null, $events)->package($this->get(), ['id' => $main]);
$this->assertSame(200, $res->status());
$data = json_decode($res->body(), true);
$ids = array_column($data['timeline'], 'event_id');
$this->assertSame([$before, $main, $after], $ids, '같은 카메라의 전후 맥락만, 시간순으로');
}
public function testPackageHidesAnotherSitesIncidentAs404(): void
{
$events = new InMemoryEventRepository();
$id = $events->insert(['device_id' => 'pi-1', 'site' => 'factory-a', 'camera_id' => 'cam-1',
'event_type' => 'fall', 'severity' => 'critical', 'occurred_at' => (float)time(), 'metrics' => []]);
$res = $this->compliance('operator', 'factory-b', $events)->package($this->get(), ['id' => $id]);
$this->assertSame(404, $res->status());
}
public function testRiskControlNeedsComplianceRole(): void
{
$events = new InMemoryEventRepository();
$body = $this->post(['event_type' => 'fall', 'hazard' => '단차 전도', 'control' => '매트 설치',
'severity_rating' => 5, 'likelihood_rating' => 3]);
$this->assertSame(403, $this->compliance('operator', null, $events)->saveRisk($body)->status());
$this->assertSame(200, $this->compliance('admin', null, $events)->saveRisk($body)->status());
}
public function testRiskRatingIsBounded(): void
{
$events = new InMemoryEventRepository();
$res = $this->compliance('admin', null, $events)->saveRisk($this->post(
['event_type' => 'fall', 'hazard' => 'h', 'control' => 'c',
'severity_rating' => 9, 'likelihood_rating' => 3]));
$this->assertSame(400, $res->status());
}
public function testHandoverCountsAreComputedServerSideNotTakenFromTheRequest(): void
{
$events = new InMemoryEventRepository();
$now = (float)time();
$events->insert(['device_id' => 'pi-1', 'camera_id' => 'cam-1', 'event_type' => 'fall',
'severity' => 'critical', 'occurred_at' => $now - 60, 'metrics' => []]);
$events->insert(['device_id' => 'pi-1', 'camera_id' => 'cam-1', 'event_type' => 'zone_warning',
'severity' => 'warning', 'occurred_at' => $now - 30, 'metrics' => []]);
$handovers = new InMemoryHandoverRepository();
$c = $this->compliance('operator', null, $events, null, $handovers);
// 브라우저가 0 을 주장해도 서버가 다시 센다.
$res = $c->acceptHandover($this->post(['note' => '인수', 'unacked_count' => 0, 'severe_count' => 0]));
$this->assertSame(201, $res->status());
$row = $handovers->recent(null, 1)[0];
$this->assertSame(2, $row['unacked_count']);
$this->assertSame(1, $row['severe_count']);
$this->assertSame('관리자', $row['to_user']);
}
}